Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-1084006.png)
Preparing rear window for installation
Preparing the rear window (hardtop) for installation
INFORMATION: Only if the rear window is re-installed.
1. Remove adhesive from the rear window.
INFORMATION: The remaining adhesive helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with
cleaning solution.
1.1. Equip cutter -C- with flashing knife -D- and remove remaining adhesive from the rear window, ensuring that a surface coating of adhesive
remains.
