Cayenne (92A) V6-3.6L (2011)
/v6-3.6l/Page-88010.png)
4.1 Resistance spot-weld roof.
4.2 Apply additional welded seams to roof in area of A-pillar using inert gas.
5. Weld in rear roof.
5.1 Resistance spot-weld roof.
5.2 Apply additional welded seams to roof in area of D-pillar using inert gas.
Drilling holes for roof rail
INFORMATION: As a result of different designs (roof), it is not possible to provide a roof with hole pattern for repair work. In this case, the holes
must be drilled subsequently.
1. Position roof rail holder -1- on the body, align and screw down with fastening screws -2-
Holder serves as drilling template.
