porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Antenna Cable|Testing and Inspection|Page 4605 > < Antenna Cable|Testing and Inspection|Page 4603
Page 9
background image

16. Pull off the connector.

17. Release the socket -Arrows A- and pull it out -Arrow B-.

18. Cut tie-wrap -a-.

INFORMATION:  The number of plugs can vary, depending on the vehicle equipment.

19. Release bracket -Arrows A- and remove the plug connections -Arrows B-
20. Release the plug connections -Arrow C- and separate -Arrows D-.

21. Press out the rubber sleeve in the direction of the right hinge -Arrow A-.
22. Remove the wire harness on the right hinge to the rear from the rear spoiler and rear roof frame - arrows B-.

Installing the antenna leads in the left rear spoiler up to the connection point

Antenna Cable|Testing and Inspection|Page 4605 > < Antenna Cable|Testing and Inspection|Page 4603