Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-835010.png)
INFORMATION:
-
When installing the wire harness, make sure the insulation of the line is not damaged.
-
The line must run over the pneumatic spring for the rear lid.
1. Push the wire harness along the left hinge into the passenger compartment and to the rear spoiler - arrows A-.
2. Pull out the wire harness through the body, roof frame opening -arrow A- downward -arrow B-. If necessary, push lead from the outside.
3. Coat the rubber sleeve with soap suds and pull in -arrow A-, until this is felt to engage in the opening - arrow B-.
