Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-927004.png)
7. Press out rubber sleeve -Arrow A- and remove line to pneumatic spring housing.
8. Pull wiring harness inside -Arrows B-. As space is limited, push the connectors individually past the rear lid hinge.
Removing wiring harness, right side of tailgate to lid hinge
1. Release connector on rear lid lock -Arrows A- and remove it -Arrow B-.
2. Release connector on contact switch -Arrows C- and remove it -Arrow D-.
3. Unclip wiring harness -Arrows A-.
4. Press out clips inwards -Arrows B-.
