Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-928001.png)
Trunk / Liftgate: Service and Repair
Installing Wiring Harness Tailgate
Installing wiring harness tailgate
Installing wiring harness, left side of vehicle to lid hinge
1. Thread wiring harness out through pneumatic spring housing -arrow-. Push the plugs individually past the rear lid hinge.
2. Lay the ground strap in the narrow connector profile -Arrow A- and fasten with fabric tape.
3. Push a tie-wire through the pneumatic spring housing -Arrow B- and attach ground lead and connector to the wiring.
4. Draw tie-wire with wiring harness out through opening -Arrow B- until rubber sleeve -b- engages fully in opening in pneumatic spring housing -c-.
INFORMATION: The line must run over the pneumatic spring for the rear lid.
