Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-928007.png)
3. Push pink socket into socket support -arrow A- until locking tabs -arrows B- are felt to engage.
4. Insert ground strap into support -arrow C-.
5. Close the support -arrow D- until the locking tab -arrow E- is felt to engage.
6. Press in support for socket -arrow A- until locking tabs -arrows B- are felt to engage.
7. Screw down both ground straps together with torsion protection -a- onto ground pin using fastening nut - arrow 1-.- Tightening torque: 6.5 ftlb.
8. Insert pink connector -arrow A- until the locking tabs -arrows B- are felt to engage.
9. Push connectors into sockets of same colour -arrows A- until locking tabs -B- are felt to engage.
10. Press plug connections into the brackets -arrows C- until locking tabs are felt to engage -arrows D-.
11. Lay wire harness in wiring duct and push on cover -arrow A- until locking tabs -arrows B- are felt to engage.
