Cayenne GTS (9PA) V8-4.8L (2008)
Coolant guide
1 - Coolant pipe with sealing ring
2 - Coolant sensor
3 - Screw, M6 x 16
4 - Screw, M6 x 12 (currently not installed)
5 - Holding clamp (currently not installed)
6 - Sealing ring
7 - Screw plug, M16 x 1.5
8 - Screw, M6 x 25
9 - Collection pipe
10 - Distributor pipe seal
11 - Cap
A - Direction of travel
6. Remove the two coolant hoses from the coolant pipe behind the cable duct (figure shows several coolant hoses).
Remove thermostat housing with coolant pipe.
Coolant hoses
7. Disconnect thermostat housing and coolant pipe if necessary. Replace sealing rings.
Installing housing for coolant regulator (thermostat housing)