Cayenne GTS (9PA) V8-4.8L (2008)
4 - Hexagon for turning the camshafts
2. Place staking tool carefully and uniformly (hand-tight) onto the cylinder head by moving the camshafts back and forth at the hexagon. Do not use
force, instead be gentle and careful.
Turning camshafts while mounting tool
3. It is not possible to set the timing here as the wide part of the side edges (dihedron) is facing upwards. Turn camshafts until the narrow part is
facing upwards.
Both camshafts in incorrect position
4. It is not possible to set the timing here as the wide part of the side edges (dihedron) of one camshaft is facing upwards. Turn camshaft in question
until the narrow part is facing upwards.
One camshaft correct - one camshaft incorrect
5. It is not possible to set the timing here as the wide part of the side edges (dihedron) of one camshaft is facing upwards. One camshaft is slightly
crooked. Turn camshafts until the narrow part of both camshafts is correctly facing upwards.