Cayenne GTS (9PA) V8-4.8L (2008)
6 - Marking area for dimension group
7 - Barcode 128 (short numeric code (without main group) and weight group)
8 - Direction of travel arrow
9 - Short numeric code (supplier)
1. Secure piston on retaining device 9597.
Piston on retaining device
2. Remove both piston-pin circlips using a small screwdriver. To do this, guide the screwdriver through the small cutout and carefully lever out the
piston-pin circlip.
Levering out piston-pin circlips with a small screwdriver
3. Insert piston into the retaining device 9597 (leave space below for the piston pins) and drive out piston pins using a suitable pressure piece.
Piston pin with plunger
4. Remove connecting rod from the piston and place to one side.