Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-258010.png)
Valve-stem seal with tool
2. Push protective cap onto valve stem end.
Protective cap
3. Oil valve stem, protective cap and valve-stem seal. Push valve-stem seal with sealing lip upwards -1- over the protective cap -2- onto the valve
stem. Remove protective cap.
Valve-stem seal pushed over protective cap and valve
4. Guide the assembly driver 9606/1 over the valve stem and fit the valve-stem seal by hand or by tapping it lightly using the rubber hammer as far as
it will go. -arrow-
