Cayenne GTS (9PA) V8-4.8L (2008)
4. Unclip wire harness on the left heat exchanger cover.
5. Unscrew the two fastening screws on the left heat exchanger cover and unclip the cover.
6. Unscrew the two fastening screws -Arrows 1- on the top retainer plate with the servo motors -A, B and C-.
7. Press in the connector -2- ( -a- ) and pull plug connection apart.
8. Pull retainer plate out in a downward direction. Loosen the guide screws -3- on the retainer plate if necessary.
9. Unscrew fastening screws -Arrows A- and remove servo motor.
10. Unscrew fastening screws -Arrows A- and remove servo motor.
Installing servo motor