Cayenne GTS (9PA) V8-4.8L (2008)
7.3. Remove line bracket -1- ( -arrow- ).
7.4. Unscrew fastening screw -4- and support the air-conditioning compressor with your hand.
8. Remove air-conditioning compressor.
8.1. Carefully press lines -1 and 2- outwards -arrows A-.
8.2.Turn the air-conditioning compressor -3- ( -arrow B- ) and remove it between the two lines -1 and 2- ( -arrow C- ).
Installing air conditioning compressor
CAUTION: Risk of damaging the air-conditioning compressor.
-
The engine must not be started until the air-conditioning system has been filled.
INFORMATION:
-
If the air conditioning compressor is blocked/seized up, then additional steps must be carried out to ensure the operation of the air conditioning.
-
New compressors are pressurised and are filled with the required amount of oil for the refrigerant circuit.
-
The remaining oil quantity in the individual components must therefore be taken into account.
-
Refrigerant oil from the compressor or refrigerant oil removed by suction from a previously run air-conditioning system may no longer be used
(special-category waste).
INFORMATION:
The union nut on the hydraulic line must be tightened to the specified tightening torque using the following tools.
-
Joint from the set socket wrench 9490
-
Ring wrench insert ring wrench insert Nr.98-4
1. Open the cap on the high-pressure side and relieve the pressure from the air conditioning compressor -A-