porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Heater/Air-Conditioning Unit|Page 4443 > < Removing and Installing Heater/Air-Conditioning Unit|Page 4441
Page 3
background image

8. Unscrew both centre air guide fastening screws -4- for the back seat area and pull out the upper air guide toward the rear -arrow A- and the lower

one toward the front -arrow B-.

9. Pull out centre air vents on the left -A- and right -B-.

10. Turn the left and right temperature sensor -90°- and pull out of the heater/air-conditioning unit.
11. Pull the centre air vents for the footwell downwards from the heater/air-conditioning unit, lift it toward the rear, and pull it out of the air vents for

the footwell.

12. Release the electric central connector -A- ( -arrows a- ), lever apart the connector lock -B- with two screwdrivers and pull off.

INFORMATION:  Make sure not to damage the insulation of the main wiring harness.

Removing and Installing Heater/Air-Conditioning Unit|Page 4443 > < Removing and Installing Heater/Air-Conditioning Unit|Page 4441