porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Heater/Air-Conditioning Unit|Page 4444 > < Removing and Installing Heater/Air-Conditioning Unit|Page 4442
Page 4
background image

13. The main wiring harness is secured to the heater/air-conditioning unit with tie-wraps. Separate the tie wraps carefully with side cutters.

14. The main wiring harness runs along the right A-pillar and is secured to the heater/air-conditioning unit in the fan area with a tie-wrap. Separate the

tie wrap carefully with side cutters.

15. Disconnect the water drainage hose from the air-conditioning unit.

16. Detach the main wiring harness on the heater/air-conditioning unit.
17. Grasp the heater/air-conditioning unit on the left and right, pull backwards about 5 cm and remove completely.

Installing heater/air-conditioning unit

INFORMATION:
Before the heater/air-conditioning unit is installed again, the following points must be checked:

Removing and Installing Heater/Air-Conditioning Unit|Page 4444 > < Removing and Installing Heater/Air-Conditioning Unit|Page 4442