Cayenne GTS (9PA) V8-4.8L (2008)
3.2. Release the two locking tabs on the holder for the magnetic-field sensor -Arrows B- and remove the sensor.
Removing magnetic field sensor - USA version as of model year 2005
Switch off ignition and remove ignition key.
1. Loosen holder for magnetic-field sensor and unplug connector.
1.1. Fold forward 2/3 rear bench.
1.2. Release connector of magnetic-field sensor -Arrows a- and pull it off.
1.3. Undo the two fastening screws -2- and swivel the holder for the magnetic-field sensor to the rear.
2. Remove magnetic-field sensor.
2.1. Release the two locking tabs on the holder for the magnetic-field sensor -Arrows a- and remove the sensor.
Installing magnetic field sensor
Caution
Safety-related bolts.
-
Always replace fastening screws for the belt buckle bracket after customer service and reworking.
-
Never make alterations to the micro-encapsulated screws, which have a negative effect on the bond (e.g. using lubricant, loosening bolts
and screwing them down again).
1. Install magnetic-field sensor and plug in connector.
1.1. Insert magnetic-field sensor in the holder and press down until the two locking tabs are felt to engage.
1.2. Push connector onto magnetic-field sensor until the connector is felt to engage.
2. Clip in holder for magnetic-field sensor and electric line on bracket for seat-belt buckle.