Cayenne GTS (9PA) V8-4.8L (2008)
Measuring point for vehicle height - rear axle
Vehicle height (vehicle height check) - front axle
The measurement is made from the wheel contact area to the bottom edge of the side member -A- of the front axle suspension subframe (between
camber and caster eccentric).
Measuring point for vehicle height - front axle
Rear axle
1. Prepare vehicle for checking and/or adjustment of wheel alignment values.
2. Place front wheels on rotary table and rear wheels on rotary / sliding plates.
3. Compress vehicle at front and rear axles by approximately 25 mm 2-3 times and allow it to spring back freely.
Adjusting
Adjusting front axle caster
Specified tightening torque for fastening nut on caster eccentric adjuster -B- = 180 Nm (133 ftlb.)
Caster is adjusted at the caster eccentric adjuster -B-.
Caster eccentric adjuster -B-
Front-axle toe-difference angle