Cayenne GTS (9PA) V8-4.8L (2008)
14. Fold back carpeted floor and sound absorber -A- in the front right footwell.
Subsequent work
1. Investigate the moisture leakage using the traces of water. Take into account the description "Sealing front panel".
2. Install front right seat frame.
3. Install front right side section trim.
4. Install cover under right instrument panel.
5. Carry out work instructions after disconnecting the battery.
Connector - General Information
Connector - General information
Tools
Connector - General information
INFORMATION:
-
For repairing wire harnesses, the wire harnesses listed in step 1 are only offered as complete units, without exchanging individual connectors.
-
For repairing or replacing connectors on wire harnesses which do not have to be completely replaced, the correct procedure is listed under Step 2
and 3.
1. Wire harnesses which are replaced only as a complete unit.
1.1. Wire harness for door sub-frame and wire harness for door trim panel.
1.2. Wire harness for rear-view mirror.
1.3. Front wire harness.
1.4. Wire harness for bonnet.
1.5. Rear wire harness.
1.6. Wire harness for tailgate and wire harness for rear window.
1.7. Wire harness for spare wheel mount.
1.8. Wire harness for removable towbar.
1.9. Wire harness for engine.
1.10. Wire harness in transmission.
1.11. Wire harness for battery wiring.
1.12. Wire harness for additional heating.
1.13. Antenna leads.