porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3443 > < Procedures|Page 3441
Page 7
background image

20. Remove rubber sleeve from the bulkhead -arrow-.

21. Unclip wire harness in plenum panel at the retaining clips -arrows-.
22. Remove rubber sleeve -31- on the left firewall.

22.1. Remove rubber sleeve on the left firewall in direction of the interior -arrow- and remove the front left wire harness.

23. Unclip wire harness with the retaining clips on the upper side member -arrow-.

24. Loosen ground strap for right firewall -32-.

24.1. Screw off fastening nut on the right firewall and remove ground strap together with the twist lock from the threaded bolt -arrow-.

Procedures|Page 3443 > < Procedures|Page 3441