porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3444 > < Procedures|Page 3442
Page 8
background image

25. Unclip wire harness at the retaining clips -arrow A- and remove rubber sleeve from the bulkhead -arrow B-.

26. Pull off connector on hydraulic unit -33- and remove rubber sleeve -34-.

26.1. Release connector on hydraulic unit -arrow A- and pull it off -arrow B-.
26.2. Unclip wire harness at the retaining clips -arrows C-.
26.3. Remove rubber sleeve on the right firewall in direction of the interior -arrow D- and remove front right wire harness.

27. Screw off ground strap -35- on the centre firewall.

27.1. Screw off the fastening nut on the centre firewall and remove the ground strap with the twist lock - arrow A-.
27.2. Unclip wire harness at the retaining clips -arrow B-.

28. Pull off connector on brake fluid reservoir -38-.

28.1. Release connector on brake fluid reservoir -arrow A- and pull it off -arrow B-.

Procedures|Page 3444 > < Procedures|Page 3442