Cayenne GTS (9PA) V8-4.8L (2008)
24. Open clips (upper side member) -Arrow A- and remove lines -Arrow B-.
25. Remove plenum panel at front right.
26. Remove DME control module.
27. Unscrew fastening nuts -1- (to rear of DME control module) and remove ground straps together with twist lock -a- -arrows-.
28. Release plug connection (to right of DME control module) -Arrow A- and remove it to the front -Arrow B-.
29. Release plug connection -Arrow C- and disconnect -Arrow D-.
30. Open clip (holder for DME control module) -Arrow A- and remove line -Arrow B-.
31. Unscrew fastening screw -2- and fastening nuts -3- and remove DME control module -Arrow C-.
32. Open the holders in the passenger compartment -Arrows A-.
33. Undo fastening nuts -4- and remove air intake housing -Arrow B-.
34. Remove coolant reservoir.