Cayenne GTS (9PA) V8-4.8L (2008)
35. Release clip (ABS hydraulic unit) -Arrow A-, open it -Arrow B- and remove the line -Arrow C-.
36. Remove rubber sleeve -Arrow D-.
37. Remove line from rubber sleeve -Arrow E-.
38. Unclip the line -arrow-.
39. Release connector -Arrow A- and disconnect it from the ABS hydraulic unit -Arrow B-.
40. Release clips -Arrow C-, open them -Arrow D- and remove line -Arrow E-.
41. Press out rubber sleeve -Arrow F- and remove line from the passenger compartment.
Remove main wire harness - dashboard area and centre console.
Part 2
Removing and installing main wiring harness
Technical values