porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3502 > < Procedures|Page 3500
Page 66
background image

50. Insert connector -Arrow A- (D-pillar lower right) until the locking tab -B- is felt to engage.

Lay floor carpeting.

Install left rear light.

Install side trim panel for rear luggage compartment.

Install left B-pillar trim panel.

Install rear seat.

Install front left side-section trim panel.

Install subwoofer.

Install auxiliary battery.

Install Kessy antenna on rear impact member.

51. Lift vehicle.

52. Connect plug connection (rear wheel housing) -Arrows A- until the locking tab -B- is felt to engage.

53. Connect both plug connections (above angle sensor for headlight levelling system) -Arrows A- until locking tabs -B- are felt to engage.

Only in vehicles with Bi-XENON headlights and steel-spring running gear

54. Push connector onto angle sensor (rear wheel suspension) -Arrow A- until locking tabs -B- are felt to engage.

Procedures|Page 3502 > < Procedures|Page 3500