Cayenne GTS (9PA) V8-4.8L (2008)
8. Route wire harness and clip in both retaining clips -arrows A-.
9. Push on wire harness onto upper side member on the four clips -arrows B-.
10. Push connector onto coolant expansion tank -11-.
10.1. Push connector onto the coolant reservoir until it is felt to engage.
11. Connecting connector on sensor for lateral acceleration -10-.
11.1. Push on connector onto sensor for lateral acceleration in right wheel housing -arrow A- until this is felt to engage.
11.2. Route wire harness and clip in retaining clips to the wheel housing -arrow B-.
12. Push the plug connection for ABS sensor and brake pad wear indicator together -9-.
12.1. Route wire harness and clip in the three retaining clips in the right wheel housing -arrows A-.
12.2. Clip in socket for ABS sensor and brake pad wear indicator -arrows B-.
12.3. Push the plug connection for the ABS sensor and brake pad wear indicator -arrow C-, until this is felt to engage.