Cayenne GTS (9PA) V8-4.8L (2008)
13. Push connector on angle sensor for HBA -8-.
13.1. Push connector onto angle sensor for HBA on the right wheel suspension, until this is felt to engage.
14. Connect plug connection to washer-fluid reservoir -7-.
14.1. Press plug connection to washer-fluid reservoir -arrows A- until it is felt to engage.
14.2. Insert the plug connection in the bracket -arrow B-.
15. Connect connector to the antenna for TPM -6- and insert bulb holder into the direction indicator light -5-.
15.1. Push connector onto the antenna for TPM in left wheel housing -arrow A-, until this is felt to engage.
15.2. Insert bulb holder in the direction indicator light in the right wheel housing -arrow B- and turn slightly while doing so.
16. Push plug connection for front wire harness -4- together and tighten ground strap for front cross member -3-.
16.1. Press plug connection for front wire harness -arrows A- together until it is felt to engage.
16.2. Route wire harness and clip in retaining clips to the front side member -arrow B-.
16.3. Push ground straps together with twist lock on threaded bolt to the front side member -arrow C- and screw down with fastening nut -
Tightening torque: 9 Nm (6.5 ftlb.)