Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-628130.png)
14. Pull off connector on left lateral acceleration sensor -14- and circulating pump connector -13-.
14.1. Release connector on lateral acceleration sensor in the left wheel housing -arrow A- and pull it off - arrow B-.
14.2. Release connector on circulating pump -arrow C- and pull it off -arrow D-.
14.3. Unclip wire harness at the retaining clips -arrows E-.
15. Loosen wire harness on upper left side member.
15.1. Pull wire harness on upper side member down out of the clips -arrows A-.
15.2. Unclip wire harness at the retaining clips -arrows B-.
16. Remove rubber sleeve from the bulkhead -arrow-.
17. Unclip wire harness in plenum panel at the retaining clips -arrows-.
18. Remove rubber sleeve -19- on the left firewall.
