porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3567 > < Procedures|Page 3565
Page 131
background image

18.1. Remove rubber sleeve on the left firewall in direction of the engine compartment -arrow- and remove the front left wire harness.

Subsequent work

1. Install relay carrier in plenum panel E-box.
2. Install wiper motor.
3. Install air cleaner housing.
4. Install front apron.
5. Install main headlight.
6. Install front left wheel housing liner.
7. Install linings in engine compartment.
8. Install the carrier for the instrument panel.
9. Carry out work instructions after disconnecting the battery.

Sub-Part - Replacing Wire Harness In Engine Compartment At the Front Right

Sub-part - replacing wire harness in engine compartment at the front right

Preliminary work

1. Disconnect battery.
2. Remove the carrier for the instrument panel.
3. Remove heater/air-conditioning unit.
4. Remove linings in engine compartment.
5. Remove front right wheel housing liner.
6. Remove main headlight.
7. Remove front apron.
8. Remove air cleaner housing.
9. Remove coolant expansion tank.

10. Remove filler neck on tank for windscreen washer system.
11. Remove DME control unit.
12. Remove cowl panel cover.

Sub-part - removing wire harness in engine compartment at the front right

Procedures|Page 3567 > < Procedures|Page 3565