Cayenne GTS (9PA) V8-4.8L (2008)
Removing PDCC control unit
Installing control unit for Porsche Dynamic Chassis Control (PDCC)
1. Install PDCC control unit.
1.1.
Fit PDCC control unit -2- (-arrow A-).
1.2.
Plug in connector -1- on PDCC control unit -2- (-arrow C-) and lock the connector -1- (-arrow B-).
Installing PDCC control unit
2. Install PDCC control unit holder.
2.1.
Insert PDCC control unit holder -3- and fit it on the studs -arrow A-.
2.2.
Secure PDCC control unit holder -3- by screwing on the fastening nuts -2-.
2.3.
Fit PDCC control unit -3- on the studs -arrow B-.
Installing PDCC control unit holder
3. Tighten fastening nuts -1- on the control unit.