Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-601049.png)
12. Place line (under headlight mounting) in installation position -Arrows A- and close clips -Arrows B- until locking tabs are felt to engage.
13. Insert connector -Arrow C- until locking tab -D- is felt to engage.
14. Insert the two connectors (radiator) -Arrows A- until locking tabs -B- are felt to engage.
15. Place line in installation position -Arrows C- and close clips -Arrows D- until locking tabs are felt to engage.
16. Fit ground straps together with twist lock -a- on the threaded bolt (front side member) -Arrow E- and secure with fastening nut -1-. - Tightening
torque: 6.5 ftlb.
17. Clip in the socket (front cross member) -Arrow A-.
18. Insert connector -Arrow B- until locking tab -C- is felt to engage.
19. Fit ground straps together with twist lock -a- on the threaded bolt -Arrow D- and secure with fastening nut -1- - Tightening torque: 6.5 ftlb.
Only for vehicles with automatic headlight levelling system
20. Push connector onto angle sensor (wheel suspension) -Arrow A- until locking tabs -B- are felt to engage.
21. Place line (wheel housing) in installation position -Arrow A- and close clips -Arrow B- until locking tabs are felt to engage.
22. Insert connector -Arrow C- until locking tab -D- is felt to engage.
