Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-656003.png)
Hydraulic pump V8 PDCC
1. Pull the cover of the throttle body up and off -arrow-.
Cover 4.8 V8
2. Remove air box for throttle housing (Y-pipe).
Information
^
Cayenne Turbo only., Before removing the cover of the air cleaner box, the intake manifold of the turbocharger must be disengaged from the air
cleaner housing.
^
Loosen the pulley of the hydraulic pump before removing the drive belt.
3. Remove the left air cleaner housing. To do this, follow Steps 4 and 5 -air path on Cayenne Turbo (left side)-. Steps 5 to 11 are not relevant for the
Cayenne S.
4. Disconnect intake manifold at the air cleaner cover. Remove the air cleaner cover on the Cayenne S.
