Cayenne GTS (9PA) V8-4.8L (2008)
Hydraulic pump V8 PDCC
Information
^
The engine does not need to be removed to remove and install the hydraulic pump.
Information
^
Cayenne Turbo only: Before removing the cover of the air cleaner box, the intake manifold of the turbocharger must be disengaged from the air
cleaner housing.
^
Loosen the pulley of the hydraulic pump before removing the drive belt.
1. Remove left front wheel.
2. Remove engine guard.
3. Remove front left wheel housing liner. Once the air cleaner housing is removed -arrow-, the engine compartment can be accessed easily.
4. Remove the left engine compartment cover.
Removing hydraulic pump (Cayenne Turbo/Cayenne S)
Removing hydraulic pump
Information
^
The engine does not need to be removed to remove and install the hydraulic pump.