porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Steering Column Control Module|Service and Repair|Page 3778 > < Steering Angle Sensor|Testing and Inspection
Page 1
background image

Steering Column Control Module: Service and Repair

Removing and installing Servotronic control module

Removing Servotronic control module

Removing Servotronic control unit

Remove trim panel under dashboard.

Remove holder for stop light switch.
1. Release the left relay carrier -Arrows A- and pull it down and out -Arrow B-.

2. Remove the control unit from the relay carrier -arrow-.

Installing Servotronic control module

Installing Servotronic control unit 

1. Place control unit on the relay carrier -arrow-.

Steering Column Control Module|Service and Repair|Page 3778 > < Steering Angle Sensor|Testing and Inspection