Cayenne GTS (9PA) V8-4.8L (2008)
Steering Gear: Service and Repair
Removing and installing steering gear
Preliminary work
Information
^
Rack-and-pinion steering gear and servo pump must not be repaired or dismantled!
^
Always replace the O-rings on hydraulic lines!
^
Ensure absolute cleanliness at all times!
^
Steel flexi-pipes must not be kinked or crushed.
^
Observe safety requirements!
Information
^
Fix steering wheel with wheels in straight-ahead position (engage steering column lock or clamp steering wheel in center position with steering
wheel holder). If this is not done, the airbag contact unit will have to be put in the center position after installation of the steering gear.
^
Before the feed and return lines are loosened, place a suitable container underneath to collect steering fluid.
^
Wear protective goggles and gloves.
1. Remove wheel.
2. Remove engine guard.
3. -Wheel housing liner- must be partly removed.
Partly removing wheel housing liner