Cayenne GTS (9PA) V8-4.8L (2008)
4. Carefully pull out the anti-roll bar.
Installing stabilizer
Installing anti-roll bar
-1- - Stabilizer
-2- - Stabilizer bearing
-3- - Clamp
-4- - Fastening screws
-5- - Connecting rod
-6- - Fastening screw
-7- - Fastening screw
-8- - Fastening nut
Caution
Danger of injury and material damage if the wheel carrier is raised incorrectly.
^
Crushing and other injuries can occur due to slipping parts.
-> Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels). When raising the suspension, use a suitable
intermediate layer (hard rubber).
-> Do not damage the brake cover plate.
Information