Cayenne GTS (9PA) V8-4.8L (2008)
Calibrating transmission mount
Information
If tool T10214/3 is not screwed to the mount, this can damage the tool.
3. Screw tool T10214/3 to the calibrated mount.
Screwing on tool
4. Tool T10214/3 together with the new mount must be positioned on the transmission cross member. The notch on the special tool -arrow- must be
aligned with the marking -arrow- on the transmission cross member before being removed.
Aligning transmission mount
5. Press the calibrated mount -2- into the transmission cross member using the workshop press. When doing so, make sure the mount is aligned with
the transmission cross member.