Cayenne GTS (9PA) V8-4.8L (2008)
Tools and materials
Disassembling drive shaft
Caution
Watch out for falling parts during disassembly work.
^
Possible danger of injury or damage.
-> Wear protective gear (e.g. safety shoes, gloves).
-> Get another worker to help.
Only the joint on the transmission side can be replaced on the rear axle. Otherwise the entire drive shaft must be replaced.
1. Remove cap from joint -arrow-.
Removing cap
2. Remove circlip using circlip pliers NR.68.
3. Remove clamp and hose clamp at the boot -arrow-.