Cayenne GTS (9PA) V8-4.8L (2008)
Toothed segment on oil guide housing
Position toothed segment at the bottom two threaded bores of the oil guide housing.
2. Block the drive plate. To do this, attach toothed segment 95381 to a threaded bore at the bottom of the oil guide housing so that at least one tooth
engages with the ring gear.
Toothed segment
3. Remove drive plate. To do this, loosen the 10 fastening screws crosswise.
Drive plate
4. Remove drive plate.
5. If the drive plate is stuck, remove it using an internal puller and a slide hammer.