Cayenne GTS (9PA) V8-4.8L (2008)
3. Fit wiper motor to wiper linkage and position it. Screw in fastening screws -10- and tighten to the specified tightening torque - Tightening torque:
6.5 ftlb.
4. Place linkage on wiper shaft, position it, set dimension -X- = 4 mm between mechanical stop and motor crank (wiper motor) and tighten with
fastening nut -9-. - Tightening torque: 13 ftlb.
5. Position wiper system. Engage support -B- on the body, insert wiper motor with linkage downwards on the driver's side, rotate wiper linkage
slightly and lay it down.
INFORMATION: Observe the order for the fastening screws.
6. Position fastening screws -8- for wiper system and tighten beginning on the driver's side - Tightening torque: 7.5 ftlb.