Cayenne S (9PA) V8-4.5L (2003)
2.2 Insert console --> Figure 7-A- in center console storage bin and drill three holes with a diameter of 2.5 mm --> Figure 7 -B- in the center
console floor.
Remove console from center console storage bin.
3
Install wire harness (retrofit kit) in center console.
NOTE:
Figures 8 - 10 show the routing of the auxiliary line on a vehicle with an air-conditioning line with mechanical control (I-no. 9AB) or Climatonic
(I-no. 9AD). There is no air duct --> Figure 9 -C- on vehicles with 4-zone air conditioning. The auxiliary line is routed in the same way as the
air-conditioning line with mechanical control (I-no. 9AB) or Climatonic (I-no, 9AD).
3.1 Route auxiliary line (e.g, Tekalan line) --> Figure 8 -A- in direction of arrow under the transverse strut --> Figure 8 -B- at the right past the
selector lever support --> Figure 9 towards the rear --> Figure 10.
3.2 Secure wire harness (retrofit kit) to the auxiliary line.