porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 8127 > < Initial Inspection and Diagnostic Overview|Page 8125
Page 24
background image

Actual/Required Installed Components List

Actual/Required Installed Components List

All MOST control modules that are connected to the PCM2 are entered in the 'required installed components list'. An actual installed components list is
written and saved when the PCM2 is started.All MOST control modules that are connected to the PCM2 are entered in the 'required installed
components list'. An actual installed components list is written and saved when the PCM2 is started.

Audio Tests

Audio Tests

Using this menu item, you can carry out a check on the loudspeakers for vehicle equipment with no external amplifiers (BOSE or Harman). The
following selection is available:

-

Manual single selection

-

Automatic test

CAN Infotainment

CAN Infotainment

Communication between the Porsche System Tester II No. 9588 and the MOST control modules only takes place via the K lead to the instrument cluster.
The data is transferred from the instrument cluster gateway to the MOST control modules via CAN Infotainment to the PCM2 gateway, via the electrical
MOST in the PCM2 and via the optical MOST outside of the PCM2.

CD Changer (CDC)

CD Changer (CDC)

The CDC is available as an optional feature and is linked to the PCM2 via the optical waveguide.

Country-Specific Tuner Settings

Country-Specific Tuner Settings

Initial Inspection and Diagnostic Overview|Page 8127 > < Initial Inspection and Diagnostic Overview|Page 8125