Cayenne S (9PA) V8-4.5L (2003)
^
The cable guide in the expanding spring must be at the bottom!
5. Position disc brake pads by operating the brake several times.
6. Check brake fluid level and correct if necessary. The brake fluid level must be between the -MAX-MIN marking-.
7. Mount wheel.
^
Use correct tightening torques!
Bedding in the brake pads
New brake pads require a bedding-in period of approximately 200 km! Not until then do they achieve their best friction and wear coefficient! During
this period, the brakes should be subjected to full stress when travailing at high speed only in emergencies!