Cayenne S (9PA) V8-4.5L (2003)
5. Position arm bracket 9679 in the belt pulley and turn it until it locks.
Caution: Risk of damage!
^
If the tool slips or if the tool is faulty, the wings can be damaged as a result of excessive forces!
^
Use a 1-inch tool only!
^
Ensure that the tool is seated correctly!
^
Never use the special wrench, socket wrench insert 9714, for undoing or tightening!
6. Position a large torque wrench and undo the central screw (a/f 27). Do not use the screw again.
7. Remove the central screw and pull the belt pulley down and forward.
Installing crankshaft belt pulley
Note:
^
A feather key is inserted into the crankshaft. When fitting the belt pulley, ensure that the feather key slots into the groove in the belt pulley.
^
The feather key must not fall into the engine.