Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-463014.png)
6. Then lay a loop around the power pump -5- .
7. Guide the loose end of the drive belt from the coolant pump downwards and place around the generator belt pulley -6- and deflector roller -7- of
cylinder bank 1-4.
8. Gather the belt section between the deflector roller of cylinder bank 1-4 and the crankshaft belt pulley to form a loop and guide it upwards to the
tensioning roller -8-. Use a wrench (a/f 30) to turn the tensioning roller -8- clockwise at the hexagon clockwise and put on the drive belt. Slowly
relieve the tensioning roller.
Fitting the drive belt
9. Check whether the drive belt is correctly positioned on the pulleys.
