Cayenne S (9PA) V8-4.5L (2003)
Installing bracket for oil-water heat exchanger
Note: The illustrations are taken from the Cayenne Turbo (M48150).
Installing bracket for oil-water heat exchanger
1. Replace both O-rings in the flange. To do this, lever out the O-rings carefully with a non-abrasive object (plastic wedge) and replace them with
new ones.
2. Replace the O-rings on the oil discharge flange. To do this, lever off the O-rings carefully with a non-abrasive object (plastic wedge) and replace
them with new ones.
Caution: Risk of damage!
^
If the compensating element has not been screwed in, the bracket can be braced and break during operation.
^
Screw the compensating element in completely before fitting the bracket.