Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-480004.png)
3. Screw in longitudinal compensating element. To do this, insert an Allen key through the screw hole in the bracket and turn the key in an
anti-clockwise direction until the compensating element is positioned on the bracket.
4. Coat the two discharge flanges lightly with engine oil and position the bracket on the engine. Press the bracket firmly against the engine until the
fastening screws can be positioned.
5. The sleeve -1- is screwed in. Position the three fastening screws and tighten them hand-tight.
6. Adjust compensating element. To do this, insert an Allen key through the screw hole in the bracket and turn the key in a clockwise direction until
the compensating element is positioned on the engine. Tightening torque: 2 to 5 Nm (1.5 - 3.5 ft. lbs.).
7. Fit upper fastening screw. Insert the screw through the compensating element and tighten to 23 Nm (17 ft. lbs.). Tighten the three remaining
fastening screws to 23 Nm (17 ft. lbs.).
