Cayenne S (9PA) V8-4.5L (2003)
4. Relieve and remove drive belt. To do this, use an open-ended wrench (a/f 30) to turn the belt tensioner clockwise and remove the drive belt from
the tensioning roller. Relieve the belt tensioner slowly.
Removing the drive belt from tensioning roller -8
5. Position arm bracket 9679 in the belt pulley and turn it until it locks.
Caution: Risk of damage!
^
If the tool slips or if the tool is faulty, the wings can be damaged as a result of excessive forces!
^
Use a 1-inch tool only!
^
Ensure that the tool is seated correctly!
^
Never use the special wrench, socket wrench insert 9714, for undoing or tightening!
6. Position a large torque wrench and undo the central screw (a/f 27). Do not use the screw again.