Cayenne S (9PA) V8-4.5L (2003)
2. Turn retaining pin out of the latch -1- and pull out -2-.
NOTE:
-
There is a retaining pin on the left side underneath the heat exchanger which joins the lower holding tray (where the heat exchanger is located)
to the air conditioning unit.
-
As soon as the retaining pin has been pulled out, the heat exchanger with the holding tray can be folded down.
3. Raise the retaining clips in -6-, -7- and -8- -arrow- and remove upper half of housing.
4. Remove evaporator -P-.
NOTE: Depending on the condition and reasons for replacing the evaporator, unscrew the expansion valve.
Installing the Evaporator
Assembling heater/ A/C unit