Cayenne S (9PA) V8-4.5L (2003)
1. Unscrew the fastening screws -4- for the refrigerant lines -A- and -B-.
2. Unscrew the fastening screws -5-, holder for the refrigerant lines -A-, -B-, and the coolant lines -C-.
3. Unclip lines -A, B, C- from the holder.
1. Unscrew the fastening screws -4- for the refrigerant lines -A-, -B-, and for the coolant line -C-.
2. Unscrew the fastening screws -2- for the refrigerant lines, close the refrigerant lines -A- (low pressure) and -B- (high pressure) and the connections
with plugs.
3. Pull out refrigerant lines -A- (low pressure) and -B- (high pressure) together. Unclip lines from the retaining clips.
Removing the rear vehicle floor suction line
-
Remove refrigerant by suction.
-
Observe safety regulations when working with refrigerant. Refer to, Safety regulations for working on air-conditioned vehicles and dealing with
refrigerant R134a.
-
Remove rear left wheel.
-
Remove rear left wheel housing liner.
-
Remove cover, centre left.