Cayenne S (9PA) V8-4.5L (2003)
Horn: Service and Repair
Removing And Installing Horn
Naturally-aspirated engine:
-
Before the horn can be removed, the respective wheel housing liner must be partially disassembled.
-
Remove the ignition key.
Turbocharged Engine:
-
Before the horn can be removed, the front bumper must be disassembled. Refer to Removing and installing front bumper.
-
Remove the ignition key.
NOTE: There is a horn at the front left and front right in the area of the fog lights.
Removing Horn
1. Unscrew the hexagon-head bolt and disconnect the electrical plug connection.
2. Remove the horn.
Installing Horn
Connect the electrical plug, position the horn in place and secure with the hexagon-head bolt. Tightening torque 20 Nm (15 ftlb.).
Naturally-aspirated engine:
Secure the wheel housing liner.
Turbocharged engine:
Install front bumper.