Cayenne S (9PA) V8-4.5L (2003)
WARNING:
Danger of fire.
-
Keep clear of ignition sources.
-
Do not smoke.
-
Danger of fire due to naked flames and sparks, e.g. during welding or grinding work.
-
Danger of fire due to escaping fuel, e.g. on hot engine components or due to electrostatic charge.
-
Danger of fire due to hot exhaust system. Always allow the exhaust system to cool down.
-
Secure the vehicle, e.g. with a warning sign.
-
Change any clothing soaked with fuel immediately.
-
In case of fire, use CO(2) or dry powder fire extinguishers.
CAUTION:
-
Please observe general warning notes and working regulations.
-
For safety reasons, the tank should only be removed and installed when empty.
1. Raise the vehicle to the take-up points provided using a lifting platform.
2. Deactivate air suspension.
3. Open filler flap.
4. Screw the tank cap down. Then remove the rubber sleeve around the fuel filler neck, loosen the two fastening screws (M6 x 25) and remove the
ground cable.
5. Remove rear right wheel.
6. Remove rear right wheel housing liner.
CAUTION:
Risk of damage
-
Lines can become kinked or can crack.
-
Never leave carbon canister hanging freely on the lines.
-
A second person should hold the carbon canister during removal.
7. Loosen the five fastening screws on the carbon canister and the two on the degassing tank in the right wheel housing -arrows-.